Isorast® Floor-Ceiling System

The Isorast® Floor - Ceiling System consists out of light weight steel girder, a sophisticated insulation panel with sound dampening qualities. The ceiling underneath is part of this insulation panel. On top of the floor system a 5 cm (2 inch) concrete core will be poured. No hanging drywalls, the ceiling is ready for finish work. It can be finished with stucco, wood boards, foam boards or any kind of ceiling tiles. Electric pipes and light fixtures are easily cut in the insulation panel between the girder, before the concrete is poured. The steel girder are galvanized and come pre-cut in the raster of 12.5 cm (4.92 inch).



Insulation:  Raw ceiling (floor) - U = 0.29 W/(m2 K)
Acoustic insulation: Raw ceiling stuccoed 37 dB, including top concrete core (swimming) 50 dB.

The floor / ceiling system is mainly used as ceiling in one storey structures and as floor/ceiling in multiple storey structures or for buildings with an basement. Air circulation channels on top of the floor system can be installed  with the 18 cm (7 1/8) wide  Isorast wall elements. Those channels eliminated the inefficient duct work and provide a clean air stream to the room underneath. For the connection from the channel to the room a PCV pipe can be installed in the insulation panel with a grill underneath in the ceiling part or the panel (before concrete pour). Those channels will serve the need of fresh air for heading or cooling purpose.

More advanced, eco-oriented user can also chose the new radiant wall cooling / heating system. A capillary system in the Isorast interior walls insulation. Cold or warm water is running slowly through the system and is cooling (heating) the wall interior surface. No compressor needed, no dirty filter will distribute bacteria or dust in the room anymore. A special clay mix stucco will self regulate the room humidity and takes odors or dust out of the air. Clay is an earth based natural material and widely used since over 1000 years. The room climate is so healthy that some people with allergic- or breathing problems say that their problems disappeared after several weeks living in the house. Another beneficial " side-effect" of Clay is the reduction of high frequency and magnetic fields up to 99%. For more information, please ask your state or county Partner.



  Floor / Ceiling Installation:





The installation of the floor / ceiling system is easy, clean and fast. Steel girder, insulation panel and concrete. All walls, interior and exterior will be connected to the floor/ceiling system. Tremendous strength is created for the entire structure. High insulation and complete elimination of acoustic lenght transfer through the patented "Goesele Schlitze". The integrated ceiling can be finished with stucco, wood panels or any other application. Light fixtures and anchors should be integrated in the hard foam insulation panel before the last concrete pour. For more information and all benefits of the floor/ceiling system, please contact your local distributor or licensed contractor.




1) 6 mm steal rods, distance 37.5 cm (14.76 inch) crosswise distribution of the loads.

2) 14 mm steal rods, 3 m (10 feet long), for the connection of two girder.


   

Working load in kN/m2 qi

One field floor with a steel girder distance of

Two field floor with a steel girder distance of

 

75 cm | 29.5 inch

50 cm | 19.68 inch

75 cm | 29.5 inch

50 cm | 19.68 inch

1,50 kN

5,62 m | 18.4 feet

6,50 m | 21.32 feet

6,50 m | 21.32 feet

7,25 m | 23.78 feet

2,25 kN

5,25 m | 17.22 feet

6,12 m | 20.07 feet

6,12 m | 20.07 feet

6,87 m | 22.53 feet

5,00 kN

4,25 m | 13.94 feet

5,12 m | 16.80 feet

4,87 m | 15.97 feet

5,75 m | 18.86 feet


Email
First Name
Name

Monthly News
© SRI Inc. 2007